If Periodic Inform is enabled, the duration, in seconds, between CPE attempts to connect to the ACS. This value must match the Connection Request Password configured on the ACS. This value must match the Connection Request Username configured on the ACS. This value is required and must match the password configured on the ACS. Match the username configured on the ACS. The default username is the Organization Unit Identifier (OUI). The is theĭomain name or IP address of the ACS server.īoth the IP address and the port number are required. The format should be http(s)://:port or :port. After making changes, click Submit to save your settings, or click Cancel to redisplay the page with the saved settings.Ĭlick Enabled to enable remote provisioning, or click Disabled to disable this feature. It provides the communication between the CPE and the ACS.Įnter the settings as described below. (Technical Report 069) provides a common platform to manage all voice devices and other customer-premises equipment (CPE) Use the Administration > Management > TR-069 page to configure communication with an Auto-Configuration Server (ACS) via TR-069 CPE WAN Management Protocol (CWMP). Radio button and then enter the desired IP address or range. To specify an external IP address or range of IP addresses, select the second Choose Any IP Address to allow access from any external IP address. You can use this feature to limit access to the ATA web page based on the IP address of a device. You can change this setting only when your computer is connected to the configuration utility from the LAN. If you enabled Remote Management, choose whether or not to allow firmware upgrades from a device on the WAN side of the ATA.Ĭlick Enabled to enable this feature, or click Disabled to disable it. IP address of 203.0.113.50, and the default Remote Management Port of 443, you would enter: For example, with the HTTPS protocol, a WAN Include the specified protocol when you enter the address in your web browser. Select the protocol to use for access to the ATA web page from a device on the WAN side of the ATA. For more information, see User List (Password Management). Use the Administration > Management > User List page to change the administrator password. Click OK to acknowledge the warning message. If you attempt to enable this feature while using the default administrator login credentials, you will be prompted to change The other fields in this section of the page are available only if you enable this feature. Subnet in your office or from your home computer. For example, you could connect from another Remote Access SettingsĪllows access to the ATA web page from a device that is on the WAN side of the ATA. In addition to the ATA web page access, the Cisco ATA 192 provides more features of Remote Management. For secure Internet access, select HTTPS. Select the protocol to use for access to the ATA web page from a device on the WAN. Cisco ATA 192 Web Access Management Settings Admin Access allows you to manage the configuration from a computer For example, with the HTTPS protocol, a WAN IPĪddress of 203.0.113.50, and the default Remote Management Port of 443, you would enter: Īccess to the Cisco ATA 192 web page is enabled by default. Include the specified port when you enter the address in your web browser. The default value is HTTPS.Įnter the port number to use for access to the ATA web page from a device on the WAN side of the ATA. If you administer and configure the ATA from a computer that is connected to the LAN, this This feature controls access to the ATA web page from devices that are connected via the ETHERNET (LAN) port.Ĭlick Enabled to enable this feature, or click Disabled to disable it. For example, with the HTTPS protocol, a WAN IP address Protocol, the WAN IP address of the ATA, and the specified port number. To access the ATA web page, launch a web browser and enter the URL in the address bar. In your office network, and Web Utility Access allows you to connect from a computer on a different subnet or on the Internet. Use the Administration > Management > Web Access Management page to configure the settings for access to the administration of the ATA.Īccess to the Cisco ATA 191 web page is enabled by default. Use the Management pages to manage web access to the ATA web page and to enable protocols for remote configuration and network
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |